|Home||» Products||» LAB MODELS||» Mini Communiting Mill|
Owing to our persistent efforts, we are enlisted amongst prominent manufacturers, suppliers and exporters of Mini Communiting Mill. These machines are fabricated using robust stainless steel 304 with the help of cutting-edge technology at our sophisticated manufacturing unit. Our products are commonly used for pulverization and granulation applications in varied industries. To ensure their compliance with the international quality norms, these machines are duly checked on various parameters. Mini Communiting Mill is appreciated in the market for the following features:
KSD-MCM (CAD MILL)
1000 - 2250 - 4500 RPM
8 Nos. Stainless Steel with knife and impact edge
10-100 Kgs. / Hr. Depending on the product and the reduction required in size.
1. Round/Square hole perforated S. S. Sheet
2. Woven S. S. wire mesh
2 HP / 1440 RPM / 3 Ph.
* Varies according to product, rotor speed and screen.
Product kept in the hopper slides down to the enclosed chamber, where it is milled in between beaters and screen to the required mesh/micron size which can be collected at the bottom in the container.
Quality and output depends upon the three main variables
1. Beaters shape (knife/impact forward)
3. Screen size
Knife edge for coarse or large particles and impact or flat edge for finer particles. High speed for fine grinding, low speed for coarser particles. A wide range of screen is available for various process needs.
GMP point of view machine is totally enclosed with SS 304.
For safety purpose, all moving parts are covered in body by SS 304 sheet.
Very less down time as only beaters assembly will have to be reversed (not the complete chamber) for making it knife to impact forward or vice-versa which can be done by single operator and without using any tools.
Fixed beaters assembly is provided as a standard supply which increase the output by 10% to 30% reduce noise level and also ease to clean as there are no cavities. (If product demands, swing beaters assembly can be provided).
Beaters and shaft are of stainless steel 410 quality and beaters are further hardened and chrome plated. Beaters are fitted on a splined shaft.
Transmission of heat to the chamber from bearings is minimum as they are away in separate pillow blocks. This facilitates to some extent in processing of heat sensitive products.
This facilities to some extent in processing of heat sensitive products.
Beaters assembly is dynamically balanced which reduce vibration and noise level and increases bearings life.
Castors provided for mobility & breaks can be applied for fixing machine at one place.
Machine is available in plain & water-jacketed models. Flameproof electricals can be provided on demand at extra cost.